Skip to content

Radio Thermostat Zwave Plus Automation Thermostat

The CT110 is a Zwave low voltage thermostat designed for use with home automation systems.  It features a sleek attractive design and can be powered by batteries or 24VAC furnace power for new installations or retrofit.

The CT110 uses the newest Gen5 Zwave Plus chip and is backwards compatible with regular Zwave systems.

The CT110 works with home automation certified hubs including but not limited to VeraEdge, VeraPlus, Zipato, SmartThings as well as with alarm systems including,, Helix.  As an automation thermostat it does not have on board scheduling but rather is designed to respond to the controller's schedules and events including heat/cool setpoints, fan on/auto, etc.

Radio Thermostat CT110 Features

  • Zwave automation thermostat
  • Zwave+ and Zwave support
  • Gen 5 chip
  • Displays Fahrenheight only on thermostat
  • Sleek design
  • Can run on 4AA batteries (not included) and/or 24VAC (C Wire)
  • Includes optional trim plate for covering larger holes / paint irregularities.
  • Firmware upgradeable (where supported by controller)
  • Dimensions without trim plate:  6.25 x 3.6 x 1.2 inches, 159 x 93 x 30 mm (W x H x D)
  • Dimensions with trim plate: 7.5 x 5 inches (H x W)
  • North American Zwave frequency: 908.42 Mhz
  • Contact rating 2A carry, 5A surge @ 24VAC

Compatible with:
  • Standard forced air 24VAC or millivolt systems
  • Single or two stage heat/cool
  • Heat Pump
  • Zoned hot water heat


  • Thermostat
  • Trim Ring
  • Mounting screws
  • Drywall anchors